DBIP guide
Set up per-behavior tracking, run timed observation sessions, review recorded evidence, complete fidelity checks and coordinate coaching and support follow-ups in the Digital Behavior Intervention Plan (DBIP) area.
- Plans
- Practice and higher
- For:
- BCBAs and specialists, Teachers, Administrators
- Read time
- 17 min read
- Updated
What DBIP is for
DBIP stands for Digital Behavior Intervention Plan. It is the part of Classroom Pulse where a team records how a behavior plan is carried out from day to day. On a phone, open DBIP directly. On a larger screen, choose DBIP in the sidebar. Seven tabs run across the top of every DBIP page: Overview, Setup, Sessions, Analytics, Fidelity, Coaching and Follow-ups.
- Setup: define each behavior you track and how it is measured.
- Sessions: record behavior during a timed observation session.
- Analytics: review counts of what was recorded, and export the data.
- Fidelity: rate how fully the plan strategies were used.
- Coaching: schedule coaching appointments, record observations of a teacher and draft coaching notes.
- Follow-ups: assign and resolve the support work that follows a fidelity check.
Overview tab
Overview is the hub. A Support follow-ups panel at the top shows how many support tasks are overdue, pending or still unassigned, with a Review support follow-ups link. When you have students, a Ready to collect data? banner offers Start a session and Set up tracking.
- Four counts: Students, Sessions Today, Avg Fidelity and Alerts. Alerts counts students whose fidelity needs attention or whose trend is declining.
- DBIP Features: cards for Behavior Setup, Sessions, Analytics, Fidelity and Coaching (marked For Coaches). Each card opens its tab.
- Students: a card for each of your first six students with their sessions today, latest fidelity score and trend, plus Start Session and View Data buttons. Manage Students opens the roster.
Setup tab
The Setup tab (shown as Tracking Setup in the breadcrumb) holds one tracking configuration per behavior. Start here to agree on definitions, measurement and phase. If no active configuration exists, Sessions may offer behaviors already saved on the student profile; that fallback does not mean a reviewed tracking configuration exists.
- Choose the student under Select Student.
- Choose Add Config (or Add First Configuration when the list is empty). The form is titled New Tracking Configuration.
- Enter a Behavior Name. Use the team’s agreed observable behavior; the name cannot be changed after saving.
- Pick a Behavior Type: Target (decrease) or Replacement (increase). The type cannot be changed later.
- Add an Operational Definition in observable, measurable terms.
- Pick a Measurement Method that matches the observation. Frequency counts occurrences; duration measures time. For Independent responses (% of opportunities), both an independent-response Operational Definition and Scored opportunity definition are required. Define when to score prompted or no response. Interval methods also require the interval settings.
- Set the Initial Phase: Baseline, Intervention, Maintenance or Generalization. Baseline is the default.
- Choose Create Config.
Configurations are listed under Target Behaviors and Replacement Behaviors with their current phase and measurement method. On a phone, the complete definition appears above the action buttons. On each card, the arrow button (Change behavior phase) opens a menu of the four phases; choosing one records the change with the current date and time. The pencil opens Edit Configuration, where you can change the definition and measurement method but not the name. The X button asks Deactivate Tracking?; confirm with Deactivate or keep it with Keep Active. Deactivated configurations move to an inactive configuration(s) list with a Reactivate button. Deactivation removes that configuration from active collection but keeps its history. Reactivate it before using it again; a failed reactivation leaves it in the inactive list for retry.
Sessions tab
The Sessions tab groups your observations into a timed session for one student. An offline notice at the top reads You're Offline or Syncing Changes and shows how many changes are waiting to sync.
- Choose the student under Select Student.
- Choose Start New Session. If the student has no behaviors configured you will see No target behaviors configured; you can still start, but you cannot record until behaviors exist.
- Set Duration (minutes) to 10, 15, 20, 30, 45 or 60 minutes, or No limit.
- Set Environment: Classroom, Playground, Cafeteria, Gym, Hallway, Bathroom, Bus, Therapy Room or Other.
- Set Activity Type: Direct Instruction, Independent Work, Group Activity, Transition, Free Time, Therapy Session, Assessment or Other.
- Set the Measurement Method for the session, then choose Start Session.
While a session runs, the panel shows a timer labeled Recording, the environment, the activity and the number of Linked history records. Use Pause and Resume as needed; recording is blocked while paused. Under Record Behaviors, Quick counts one occurrence when you tap a frequency behavior. A behavior configured for duration, latency, intervals or opportunities opens its measurement tool instead of saving a frequency. Measure also lets you select a behavior and its appropriate measurement tool. Check the displayed method before recording; a tap is not a duration or an interval observation. Each save shows a Logged notice with an Undo button for five seconds. To finish, choose End Session and confirm End Session? with End Session, or go back with Keep Recording. Nothing more can be added to a session after it ends.
Recent Sessions lists the student's last 20 sessions with status, environment, start time, minutes active, and counts of active and voided records. View session details opens the session page, which shows Status, Active time, Environment, Activity, start and end times, the method, pause count and any Notes, then a Behavior Summary of Active observation records, Target records and Replacement records, and the list of Active observations. The trash icon on a record asks you to confirm Remove; the record is kept in history as voided, not deleted. Active time excludes pauses and does not by itself show how much of a behavior was observed.
Practice recording, corrections and saved history
- In an approved demo workspace, create a fictional target configuration and a replacement configuration for Independent responses (% of opportunities). The screenshots use fictional Marcus Williams; never enter practice observations on a real learner.
- Start a session for the same student. Tap the target behavior once, then use Undo on its Logged notice to practice correcting a mistaken tap. Record two intended fictional occurrences.
- Choose Pause and confirm recording controls are unavailable. Choose Resume, then select the replacement behavior. For each defined opportunity, choose exactly one of Independent, Prompted or No response. Prompted and no response count in the denominator; unobserved opportunities do not.
- Choose End Session and confirm. Open View session details in Recent Sessions and check the active observations, recorded occurrences, pause count and times. Session clock time is not behavior-specific observation coverage.
- For a mistaken saved record, choose its Remove … incident button and confirm Remove. Reopen the page to verify the reduced active count and retained voided history. Removing a record does not erase it.
- Open Analytics for the same learner and export Sessions Only. Inspect the file’s active records, voided records and timing rather than treating linked-history totals as valid occurrences.
Analytics tab
The Analytics tab shows counts of saved observations for one student. Filter by Student, School Year and Behavior (default All behaviors), and use Refresh evidence to reload. The Export Data button is also here (see Exporting DBIP data below).
Under Recorded observation evidence, two panels, Target behaviors and Replacement behaviors, show Recorded occurrences, Observation records, Days with records and Frequency records, followed by Recorded daily totals for the days that have records. The page states: "Counts describe the saved observations. Missing days have unknown coverage; they are not recorded zeroes."
Fidelity tab
The Fidelity tab is where the person carrying out a plan rates their own use of its strategies. Choose a student under Select student. The header shows Latest score, 5-check avg and Recent checks below 80%. Choose Start check to begin, or View history for the last 90 days.
- Under Fidelity Self-Check, pick a checklist. You can choose an issued plan source when a reviewed checklist exists for the student, or one of the General templates: Prevention Strategies Check, Teaching Strategies Check, Consequence Strategies Check, Data Collection Check or Reinforcement Delivery Check. Each shows its item count and an estimated time. General templates are not linked to an issued BIP version.
- Rate each item under Rate implementation: Not Implemented, Partially (< 50%), Mostly (50-80%) or Fully (> 80%). Use Not observed or Not applicable instead when the practice was not seen or does not apply; Not applicable requires a note. Unobserved and inapplicable items are not scored. Each item lists What to Look For and has a Notes field.
- Choose Next after each item and Review after the last one.
- On Review and Submit, check the overall score (for rated items only), the score for each domain, the follow-up recommendation with its Recommended follow-up date, and any Strengths or Areas for Improvement. For a checklist from an issued plan, enter the Reported observation period.
- To propose support, tick Add follow-up date and keep or change the Follow-up date (Use Recommended Date restores the suggestion). Add Coaching Notes if useful.
- Choose Submit Check. If you added a follow-up date, the app opens that check on the Follow-ups tab so you can assign the work.
Items belong to one of six domains: Prevention Strategies, Teaching Strategies, Consequence Strategies, Data Collection, Reinforcement Delivery and Crisis Intervention (the history page uses shorter names). Back on the Fidelity tab, Recent fidelity checks lists the last five with a Review record link, and Domain performance shows the most recent check by domain. The only threshold the app counts is 80%: checks scoring below it are counted as Recent checks below 80% here and as Support needed on the history page.
The history page lists checks about you from the last 90 days, filtered with Filter by Student or All Students. It shows Checks found, Average fidelity (voided records excluded), Support needed and Latest result, a Fidelity trend bar chart when one student is selected, and the Check History list. Open a check to see each response, its domain scores and Review record and corrections. On the record page, the original observer can choose Correct responses or Void record with a Reason for revision; the original is kept alongside the revision, and voided records are excluded from summaries.
Check coverage before interpreting a score
A score uses only rated items, including zero. For example, one Fully rated item plus two unobserved or inapplicable items can produce 100% with only one of three items rated. Read the coverage line, item responses and critical-component notices before interpreting the result. When every item is unobserved or inapplicable, the result is Not scored, not zero.
On a phone, scroll through the item and notes before using Next or Review. On Review and Submit, select an item in Item Summary to correct it before saving. A submitted check is a self-report of implementation; it does not establish student progress or approve the plan.
Use a reviewed issued-plan checklist when available
- Under Issued-plan checklists, choose Use issued version … checklist when the appropriate reviewed version is available. Confirm the version, source wording and checklist revision.
- The plan owner can use Review a plan you own to inspect an issued plan’s structured components. A qualified reviewer assigns each component a domain, identifies critical components, declares their review role and confirms the review before choosing Save reviewed checklist and use it. This does not independently verify credentials.
- If the app says No verified issued version is applicable today, return to the plan owner. A general template does not substitute for a version-bound issued checklist. A draft or narrative-only plan may need review, structured fidelity components and publication before it can supply one.
- For an issued checklist, enter the actual Observation start and Observation end under Reported observation period in your device’s local time. The interval must fit the issued version’s applicability. Review critical components separately even when the overall score is high.
Reopen, correct or void a saved check
- After Submit Check, find the entry under Recent fidelity checks or choose View history. History normally covers the last 90 days; confirm its student filter before interpreting missing records.
- Choose Review record (or Review record and corrections in history). Confirm the current score, item coverage and preserved original.
- The original observer with current editing access can choose Correct responses, update the affected responses or notes, enter a Reason for revision, and choose Save revision. Reopen the record to confirm the new revision and recalculated score.
- Use Void record only when the record should be excluded from summaries, with a reason. The original remains in revision history. A later Restore record also creates a recorded revision.
Find your coaching workspace
Open Coaching, then Teachers. On a phone the four coaching views wrap into two rows. Use Search teachers or Teacher priority to find the person you support. View opens their recent checks; Schedule starts an appointment. Sessions lists saved appointments; Trends summarizes recorded implementation scores.
Follow the complete Coaching Appointments and Peer Observations tutorial. These examples use fictional Marcus Williams and Jordan Lee (Demo); practice only in an approved demo workspace.
Schedule and start an appointment
- Choose Schedule on the teacher card. In Schedule coaching, select the learner under Coaching focus, or choose General coaching (no learner observation) for a discussion without a student-specific check.
- Set a future Appointment time. Check Local timezone, select relevant Focus areas, and add Planning notes. On a phone, scroll inside the dialog to reach Schedule appointment.
- Choose Schedule appointment. Confirm the teacher, learner, planned time and scheduled status on the saved Coaching appointment page. Opening an appointment does not start it.
- Under Update appointment, select Start appointment in Appointment action, then press Start appointment. The status becomes in progress. A learner-specific appointment now offers Record observation under Linked observations.
Before starting, use Reschedule appointment to choose a new future local time and give a Reason. To stop an appointment, choose Cancel appointment and enter a reason. These actions remain in Appointment activity. A general coaching appointment does not offer a learner observation.
Record a peer or specialist observation
- From the in-progress appointment, choose Record observation. Confirm Peer observation for the correct teacher and the fixed learner. Choose Peer when a fellow teacher observed, or Specialist when a behavior specialist or BCBA observed.
- Choose Start check, then an appropriate general template or reviewed, issued BIP checklist. A general template is a practice check; it does not establish fidelity to a particular BIP. See Fidelity Checks and Support Follow-ups for issued-checklist prerequisites and the actual observation window.
- Rate only what you observed. Use Not observed for missing evidence and Not applicable with a reason when appropriate. Move through each item with Next, then choose Review.
- On Review and Submit, check the coverage line as well as the score. Unobserved and not-applicable items are excluded from the score. Add Coaching Notes, review any follow-up date, then choose Submit Check.
- Saving returns to the appointment. Confirm the new Review observation recorded… link under Linked observations, then open it to inspect the saved record. The check belongs to the observed teacher with you identified as observer; it appears in their coaching checks rather than your self-check history.
Complete, correct and reopen the review
- Review each linked observation. In Appointment action, choose Complete appointment, enter a Completion summary, and check the confirmation that coaching occurred and the linked evidence was reviewed. Press Complete appointment.
- Confirm completed and The linked evidence matches the completion review. A learner-specific appointment requires at least one active, valid linked observation. General coaching can be completed with a reviewed summary and no learner observation.
- If a saved observation is wrong, open its review link, correct the responses with a Reason for revision, and save the revision. Return to the appointment and choose Reload latest appointment.
- If Linked evidence changed appears after completion, review the changed records. Choose Reopen appointment, enter a Reason, and press Reopen appointment. Review the active evidence and complete the appointment again with an updated summary.
- Use Back to coaching dashboard, then Sessions, to find the appointment later. Cancellations, reopening, planning notes and completion actions remain in Appointment activity.
Planning notes and optional AI drafts
You can always write notes yourself: open the appointment, choose Save planning notes, edit Planning notes, then press Save planning notes. Review the saved text after reloading.
When available, Draft coaching note on the teacher card generates an editable draft from their latest scored general-template check. Review and edit the draft before using it. Copy copies the text. Save draft to appointment lets you choose a matching open appointment; Save to session appends the edited draft to that appointment for that teacher and learner. Use Review the appointment for this note to confirm the destination and saved text. If no matching appointment is open, schedule or reopen one first. Issued-checklist checks and unscored checks do not offer automated drafts.
AI drafts are optional and require the relevant feature and permission. A generation error does not prevent manually writing planning notes. No note is sent to a teacher by copying or saving it here.
Recover without duplicate appointments or observations
- Earlier scheduling attempt: reopen Schedule coaching and use Check scheduling outcome. If saved, choose View saved appointment. If pending, check again or Close unsaved attempt before acknowledging and continuing.
- Appointment changed while saving: use Reload latest appointment to review its current status and notes before choosing a new action. An identical retry preserves the original request reference.
- Note save uncertain: use Retry same note save or Review the appointment for this note. The draft is retained for the same save; do not repeatedly generate and append new copies.
- Completion refused: check for an active linked observation on learner-specific appointments, required summary and confirmation, and any unavailable evidence. Voided checks do not satisfy the observation requirement.
- Missing access: return to the dashboard or ask the team administrator to check the existing assignment. Do not change roles or create replacement records.
Follow-ups tab
The Follow-ups tab, titled Support follow-ups, tracks the support work that a fidelity check proposed. It lists work you own, created, observed or are the subject of; when opened for one student it lists all staff support work for that student. The page notes that a new check does not resolve earlier work and that no appointment or external reminder is created here.
- A status line counts work that is overdue, due today and upcoming. Refresh support work reloads it.
- Show support work filters by Pending, Completed, Cancelled or All statuses.
- Assigned support work lists each task with its student, Owner, Status, due date and timezone, and notes. View support follow-up opens it.
- Unassigned proposals lists follow-up dates saved with a check that nobody has been assigned to yet. Review and assign support opens the check.
- Open a follow-up. The Support follow-up page links to Review source observation and revisions and, when there is one, View linked coaching appointment.
- If no task exists, use Assign support work: pick the Responsible staff (only staff who can currently edit the student and use fidelity tools are listed), set a Due date and Timezone, write the Support plan and choose Assign support. Work is due through the end of that calendar day in the chosen timezone and becomes overdue the next day.
- For an existing task, use Update support work and choose a Support action: Complete, Cancel, Reassign or Reschedule while it is pending, or Reopen afterwards. Completing needs a Completion summary and the confirmation that the support occurred and you reviewed the current source evidence. Choose Save support action.
Each observation has one support task, which can be reassigned or reopened. If the source check is corrected or voided after assignment, the follow-up shows a notice and stays in its current status until someone changes it. Support activity at the bottom keeps the history of actions.
Schedule thinning
Schedule Thinning is a DBIP page that is not on the tab bar. It tracks fading reinforcement toward a maintenance target, one rung at a time. Open it from the review step of the BIP pipeline, where the Begin thinning panel links to it for that BIP and student; opened on its own it only explains that a BIP and student must be selected.
- If the BIP already has a maintenance plan with thinning phases, choose Begin thinning with this plan (or Begin thinning).
- If it does not, Generate maintenance plan (AI draft) drafts a ladder for the target behavior. This uses your plan's AI BIP draft allowance. The panel asks you to review the AI-drafted ladder and to confirm only after a qualified professional has reviewed it.
- The ladder lists each rung with its schedule, status and Advance when criterion, plus the Target schedule. The app evaluates the current rung against logged behavior and marks one choice (recommended): Advance to leaner schedule, Hold current schedule or Step back to richer schedule. When it cannot evaluate, it says that clinician judgment is required. You choose the decision.
Keep the phase and recorded evidence distinct
- In Setup, confirm the student and behavior. Choose Change behavior phase and select Baseline, Intervention, Maintenance or Generalization when the reviewed plan actually changes.
- Confirm the new badge, then reopen Sessions before recording under that phase. The behavior logger saves the selected configuration and phase with the observation.
- Review the saved observations and phase history. Changing today’s configuration does not move earlier observations into a new phase. A separate phase marker provides context; it does not rewrite recorded evidence.
DBIP Analytics describes recorded evidence. It does not calculate phase effects, prove progress or approve treatment changes. Missing observation days are unknown coverage, not zeroes. Use the Progress Monitoring tutorial to review contextual phases and measurement limits with the responsible professional.
Exporting DBIP data
- On the Analytics tab, choose Export Data. The Export Options panel opens for the selected student.
- Pick a Format: CSV or JSON.
- Under Include, pick All Data, Sessions Only, Fidelity Checks Only or Tracking Configs Only.
- Choose Export CSV or Export JSON. Wait for the verified file to download, then open it from your browser’s downloads. The name begins with dbip and includes the student name and date.
Sessions include every retained session for the student, whatever the analytics filters say, with active records and retained history listed separately. Active observation details retain the recorded phase and available frequency, duration, latency, interval or opportunity measurements. CSV includes an Active observation details table with one row per active record; JSON contains those details under each session. Opportunity records include the saved definitions and outcomes; voided records remain in status history rather than active totals. Fidelity exports include checks about you for that student; if any record cannot be verified the export stops, and the history page shows what was excluded. There is no date range picker and no PDF option here. Review the file before sharing it.
Keyboard shortcuts
On the Sessions tab, press ? (outside a text field) or choose the keyboard button in the lower right corner to open Keyboard Shortcuts. Press Esc to close it. On a Mac the Ctrl shortcuts are shown with the Command symbol.
Swipe sideways on the table to see all columns.
| Shortcut | Action |
|---|---|
| Ctrl+N | Next student |
| Ctrl+P | Previous student |
| R | Refresh sessions |
| ? | Show this help |
When something goes wrong
- Setup could not load my configurations.
- A failed read is not an empty student record. Restore your connection and choose Retry loading configurations. Check the existing list before adding a new configuration. If reactivation fails, the item stays inactive and Reactivate becomes available again.
- I started a session but cannot record anything.
- If the panel says No behaviors configured for this student yet, add a tracking configuration on the Setup tab or use the Configure Behaviors link. If it says Collection is paused, choose Resume; measurements that overlap a pause cannot be saved.
- An Observation recovery panel appeared on the Sessions tab.
- A measurement was not confirmed as saved. Use Check saved status first. If it was saved, choose Discard local copy; if not, use the recorder to retry, or Download recovery copy and Retain on this device to keep the details.
- The Fidelity tab asks me to confirm a previous save.
- A check was submitted but its result was not confirmed. Choose Check again. If it says your check was saved, you do not need to submit it again; choose Continue. Otherwise choose Close unsaved attempt and start a new check.
- The Schedule coaching dialog asks me to confirm an earlier attempt.
- Choose Check scheduling outcome. If the appointment was saved, open it with View saved appointment. If it is still unconfirmed, choose Close unsaved attempt so a delayed duplicate is not created, then schedule again.
- Analytics or a session page says complete evidence is unavailable.
- Choose Refresh evidence (or Retry) once you are back online. The page shows nothing rather than a partial count, so no result has been inferred.
- The export did not download.
- The message Export not created means the full data set could not be loaded. Retry when connected. For fidelity exports, open the history page to see which records were excluded.
- Draft coaching note shows an error.
- The note needs the Practice plan or higher and counts toward your AI usage limit, so it can be unavailable for a while once the limit is reached. It is also unavailable when a district has disabled AI or when the check has no score.
- I cannot see DBIP at all.
- DBIP needs the Practice plan or higher, and the sidebar item is hidden for paraprofessional and viewer roles. Opening a DBIP address with one of those roles returns you to the Students page.
Who can use it
Swipe sideways on the table to see all columns.
| Area | Plan | Notes |
|---|---|---|
| Overview, Setup, Sessions, Analytics, Fidelity, Follow-ups, Schedule thinning, exports | Practice and higher | Hidden for paraprofessional and viewer roles. |
| Coaching dashboard, appointments, peer and specialist observations | Practice and higher | Lists teachers on your team. |
| Draft coaching note and the AI maintenance plan draft | Practice and higher | Both count toward your plan's AI limits and need professional review. |